Mike Walters

Items used: ESU 59620 LokPilot 5 DCC 8 pin decoder Disassembly: 1) Remove both coupler assemblies and set aside. 2) Gently pull the complete body assembly up and away from the chassis. 3) Remove the 8 pin plug and store in a safe place. Installation: 1) Plug the decoder in to the 8 pin socket, noting the orange wire is Pin 1 and should correspond to P1 on the model's 8 pin socket. 2) Neatly arrange the 8 pin harness and any unused wires from the decoder, such that they are terminated and...

Items used: ESU 58820 LokSound 5 Micro DCC 8 pin decoder Premium Hornby 2-BIL speaker by DCCSound Disassembly: 1) Gently splay out the lower edge of the body and lift it up and away from the chassis. Note there are 6 lugs, 3 per side holding the body to the chassis. Installation: 1) Remove the 8 pin plug/PCB and set aside in a safe place. 2) Place the speaker on top of the passenger compartment. A small amount of glue may be used to hold is in place. 3) Wire the speaker to the 2 brown...

Items used: ESU 58429 LokSound 5 21-MTC decoder Premium SDA1 class speaker by DCCSound Disassembly: 1) Remove the coupler assemblies. 2) Gently splay out the lower edge of the body and lift it up and away from the chassis. Installation: 1) Remove the 21-MTC DC socket / board if converting a DC model. 2) Correctly orientate and install the decoder. The white ESU sticker should face up once installed. 3) Remove the factory speaker by gently lifting it up off from the chassis. Disconnect both...