top of page

PTCNSW 80 class by Auscision models

Updated: Nov 12, 2021

Items used:

ESU 58429 LokSound 5 DCC 21-MTC decoder

DCCSound Premium speaker for the Auscision 80 class

To remove the body from the chassis:

1) Disconnect the MU hose from the body at each end of the model

2) Splay the sides of the body out gently. Details molded to the inside of the body sides retains it to the chassis.

3) Gently pull the body up and off from the chassis.

4) Note two small handbrake chains which need to be disconnected to enable removal of the body.

The decoder and speaker are then plugged into the model, once the dummy plug and Auscision speaker enclosure has been removed.

The JST micro plug must be moved from the DC socket to the DCC socket to enable the lighting to function on DCC.

Finally the body is reassembled to the chassis, handbrake chains and MU cables refitted.


bottom of page