NSWGR 49 class by Trainorama
Disassembly Turn the model upside down and remove the two coupler screws. Then remove the coupler assemblies. Gently pull the shell up...
Yes, we can install digital sound and non-sound decoders in your DC models. Please contact us for a quote.
However, if you should wish to complete the job yourself, feel free to browse our extensive library of installation examples. Installation tips are provided as a guide only.
Search
AN EL class by Auscision models
Items used: ESU LokSound 5 DCC 8 pin decoder DCCSound Premium speaker for the Auscision EL class The model is disassembled by first...
VR R class by Model Dockyard
At 34 years of age, the model required quite some work to convert it from DC to DCC with sound. The model was upgraded with the following...
AN CK class by Austrains
Items used: ESU LokSound 5 DCC 8 pin decoder DCCSound Premium speaker for the Austrains T class 3mm sunny white LEDs 470 ohm resistors...
NSWGR 48 / SAR 830 class by Auscision Models
Items used: ESU 58429 LokSound 5 21-MTC decoder with DCCSound's 48 class sound project DCCSound premium 48/830 class speaker The model is...
VR DERM by Steam Era Models
58 RM was sent in by a customer for a full sound fit out. The SEM kit comes with a Black Beetle spud drive, set up for operation using...
VR F class by Roco
Items used: ESU 58823 LokSound 5 DCC Micro decoder with Next18 loose wire harness ESU 50321 11x15mm sugarcube speaker DCCSound Stay-alive...
VR N class by Trainbuilder
Disassembly All work is contained within the tender. There is no work required of the engine. The tender is disassembled through four...
VR A2 class by Trainbuilder
Disassembly There is no work required of the engine, all work is done with the tender. The tender is disassembled through four screws...
VR J class by Trainbuilder
Disassembly The tender is disassembled through four screws holding the frame to the jacket. There is no work required of the engine, all...
VR DERM by Trainbuilder
2nd production run (2017) The second run of Trainbuilder DERMs came from the factory with a new spud drive located under the chassis....
DR class Watco Australia
Two DR class bespoke brass models were sent in for fit-out of lighting and DCC with sound. The customer wanted prototypical sound,...
SRANSW 81 class by Austrains
The 81 class from Austrains is fitted with an ESU 58420 LokSound V5 8 pin decoder and premium twin speakers from DCCSound. First, the...
NRC NR class by Austrains
There were two main design runs of the NRC NR class under Austrains. The first run included grain of wheat style globes. The second...
VR J class by Precision Scale Models
This particular J class was built in 1994, and is a really nice example of a quality built Samhongsa model. Disassembly First, the...
VR X class (2nd series) by PSM (SAM)
This model was to be made sound equipped, at the request of the owner. Due to the large motor and drivetrain, there is not acres of room...
TGR X class by Skilled fabricator
The DC only TGR X class model was sent in by a customer for upgrade to DCC and sound. The sound project loaded to this decoder features...
V/Line G class by Austrains
1) Remove the coupler assembly from each end of the modeller. 2) Remove the 4 screws from the underside of the chassis. These hold the...
V/Line A class by Auscision Models
2019 run: with 21-MTC pin plug Products used: ESU 58429 LokSound 5 decoder DCCSound premium speakers 1) Remove the couplers then splay...
NRC NR class by SDS Models
The 2020 release is DCC sound ready. Utilising a 21 pin plug and speaker under the chassis, decoder installation is a relatively simple...