AN CLF/CLP class by Auscision Models

Items used:

ESU 58429 LokSound 5 DCC 21-MTC decoder

DCCSound Premium sugarcube speaker to suit Auscision CLF/CLP class

To access the 21 pin plug, the body needs to be removed from the chassis.

Gently splay the sides of the body out from the chassis, then pull the body assembly upward off the chassis.

Disconnect the lighting plug from the socket on the PCB before totally separating the body from the chassis. Set the body assembly aside.

The 21 pin DC board and speaker enclosure are removed. Two screws hold the enclosure to the chassis.

Next, fit the decoder (upside down) and DCCSound premium speaker.

To enable full lighting operation on DCC:

1) Fit the long plug (from the body) to the socket with "DCC" written next to it.

2) Swap the small plug at the # 1 end of the motherboard from DC to DCC. This is for the ditchlights (if fitted).

Finally, refit the body back on the chassis.