top of page

NSWGR 44 class by Train Hobby Brass

Items used:

ESU 58420 LokSound 5 DCC 8 pin decoder

ESU 54671 Powerpack mini

DCCSound Premium speakers for the Train Hobby Brass 44 class

DCCSound Large LED pack (x2) with 3D printed light mounts for 44 class


The model is disassembled by removing 4 screws from the underside of the chassis, one in each corner and lifting the body from the chassis.


The model as built comes with globes which are removed such that LEDs can be fitted.

The track pickup and motor wiring is reworked to be DCC compatible.

The power pack is wired to the decoder and fixed to the floor towards the rear of the model.



The speakers are fixed to the chassis floor with double sided tape. The decoder is hardwired and fixed in place as pictured.


LEDs are fitted to the body and finally, the body assembly is placed back down over the chassis and four small screws refitted.


Komentarze


bottom of page