PHA Power Van by Auscision models

Items used:

ESU 58219 LokSound 5 FX DCC decoder

DCCSound Premium speaker for the Comeng Power Van

Disassembly of body from chassis:

1) Splay body sides away from chassis, as there are 4 features per side that hold the body in place.

2) Gently lift body shell from chassis, avoiding damage to fine detail.

Next, remove the 21 pin DC socket PCBA and speaker enclosure.

Fit the speaker using the two small screws. Then plug the decoder in the same orientation as the 21-MTC DC board prior to removal. Ensure all 21 pins are aligned correctly and not jammed one row out. If incorrectly installed the decoder will fail on powering up.

Test the installed decoder, and then refit the body.