Mike Walters

Items used: ESU 58823 LokSound 5 DCC Micro decoder ESU 54671 Powerpack mini Premium DCCSound speaker chassis for Atlas Genset Disassembly: 1) Remove both coupler assemblies and set aside. 2) Gently pull the complete body assembly up and away from the chassis. 3) Disconnect the front and rear headlight wires from the motherboard. Then set the body aside. 4) Next, disconnect all other wires from the motherboard and then unscrew the motherboard. it is held to the chassis with 4 screws. Two of...

Items used: ESU 58429 LokSound 5 21-MTC DCC decoder ESU 51957 Adapter board ESU 54671 Powerpack Mini DCCSound Premium Speaker for Trainbuilder Tait Disassesmbly The body is separated from the chassis via 6 screws on the underside of the chassis. The body is carefully lifted from the chassis and two, 2 pin connectors disconnected. Most of the DC lighting circuit is removed from the body, as it is not used with this DCC installation. Each LED is disconnected, with most of the lead length left...

Items used: ESU 59620 LokPilot 5 DCC 8 pin decoder Disassembly: 1) Remove both coupler assemblies and set aside. 2) Gently pull the complete body assembly up and away from the chassis. 3) Remove the 8 pin plug and store in a safe place. Installation: 1) Plug the decoder in to the 8 pin socket, noting the orange wire is Pin 1 and should correspond to P1 on the model's 8 pin socket. 2) Neatly arrange the 8 pin harness and any unused wires from the decoder, such that they are terminated and...