SRANSW 81 class by Austrains
The 81 class from Austrains is fitted with an ESU 58420 LokSound V5 8 pin decoder and premium twin speakers from DCCSound. First, the...
top of page
Yes, we can install digital sound and non-sound decoders in your DC models. Please contact us for a quote.
However, if you should wish to complete the job yourself, feel free to browse our extensive library of installation examples. Installation tips are provided as a guide only.
Search
NRC NR class by Austrains
There were two main design runs of the NRC NR class under Austrains. The first run included grain of wheat style globes. The second...
VR X class (2nd series) by PSM (SAM)
This model was to be made sound equipped, at the request of the owner. Due to the large motor and drivetrain, there is not acres of room...
TGR X class by Skilled fabricator
The DC only TGR X class model was sent in by a customer for upgrade to DCC and sound. The sound project loaded to this decoder features...
V/Line G class by Austrains
1) Remove the coupler assembly from each end of the model. 2) Remove the 4 screws from the underside of the chassis. These hold the body...
NRC NR class by SDS Models
There have been many runs of the NR class by Austrains. SDS Models took the Austrains NR model and updated it to include a 21 pin decoder...
NSWGR 47 class by Trainorama
An ESU (58820) LokSound V5 Micro DCC decoder was installed in this model for a customer. A DCCSound Premium speaker was installed in...
VR T class (ser. 3) by Austrains
Required parts: ESU 58420 LokSound 5 DCC decoder DCCSound Sugarcube speaker for Austrains T class Golden white/warm white LEDs & 470 ohm...
NSWGR 48 / SAR 830 class by Trainorama
Room is limited in this Trainorama version of the 48 class, so we have fitted a smaller ESU (58820) LokSound V5 Micro decoder, but also...
VR X class (1st ser.) by Auscision Models
Items used: ESU 58429 LokSound 5 21-MTC decoder with DCCSound 1st series X class sound DCCSound Premium twin driver sugarcube speaker The...
SRANSW XPT by Auscision Models
The first step is to remove the body from the chassis. The skirt of the body is spread ouwards and the body lifts off the chassis. It is...
VR T class (1st ser.) by BRM
1) Remove coupler chain pin from coupler box on both ends of model 2) Remove 4 body mount screws and coupler assemblies from underside 3)...
V/Line N class by Auscision Models
Fitting sound in an Auscision N class can be accomplished in one of two ways, either re-using the 8 pin plug motherboard or hardwiring a...
CR CL class by Austrains
Here, an ESU LokSound 5 decoder with DCCSound Premium sugarcube speakers has been fitted to the model. To access the model's chassis, the...
AN class by Auscision Models
1) Remove the body from the chassis by gently splaying the lower edge of the body sides away from the chassis, and lifting up. 2) With...
44 / 930 class by Trainorama
21 pin (2021 run) Items used: ESU 58429 21-MTC decoder DCCSound 930/44 class speaker Lighting notes: The re-run of the Trainorama 930...
GM / S / 42 class by Trainorama
Items used: ESU LokSound 5 DCC 21-MTC decoder DCCSound Premium speakers (S/42/GM) DC model as received: Equipped with a LokSound 5...
VR X class (Ser. 2) by Austrains
Here, an ESU LokSound 5 Standard decoder with twin driver sugarcube speaker has been fitted to an Austrains model. Access to the chassis...
NSWGR 422 class by Auscision Models
2019 re-release: The 2nd production run chassis has had a minor design modification done whereby mounting is now provided for a speaker...
NSWGR 442, SAR 700 & PTCNSW 80 class by Austrains
There were two variants of these models produced by Austrains over the years: 1) Plastic chassis, not DCC ready 2) Metal chassis, with...
bottom of page