Watco Australia DR class
Two DR class bespoke brass models were sent in for fit-out of lighting and DCC with sound. The customer wanted prototypical sound,...
Yes, we can install digital sound and non-sound decoders in your DC models. Please contact us for a quote.
However, if you should wish to complete the job yourself, feel free to browse our extensive library of installation examples. Installation tips are provided as a guide only.
Search
SRANSW 81 class by Austrains
The 81 class from Austrains is fitted with an ESU 58420 LokSound V5 8 pin decoder and premium twin speakers from DCCSound. First, the...
NRC NR class by Austrains
There were two main design runs of the NRC NR class under Austrains. The first run included grain of wheat style globes. The second...
VR J class by Precision Scale Models
This particular J class was built in 1994, and is a really nice example of a quality built Samhongsa model. Disassembly First, the...
VR X class (2nd series) by PSM (SAM)
This model was to be made sound equipped, at the request of the owner. Due to the large motor and drivetrain, there is not acres of room...
TGR X class by Skilled fabricator
The DC only TGR X class model was sent in by a customer for upgrade to DCC and sound. The sound project loaded to this decoder features...
V/Line G class by Austrains
1) Remove the coupler assembly from each end of the model. 2) Remove the 4 screws from the underside of the chassis. These hold the body...
V/Line A class by Auscision Models
2019 run: with 21-MTC pin plug Products used: ESU 58429 LokSound 5 decoder DCCSound premium speakers (A/B class, pre 2020) 1) Remove the...
NRC NR class by SDS Models
There have been many runs of the NR class by Austrains. SDS Models took the Austrains NR model and updated it to include a 21 pin decoder...
NSWGR 47 class by Trainorama
An ESU (58820) LokSound V5 Micro DCC decoder was installed in this model for a customer. A DCCSound Premium speaker was installed in...
SAR SMC "Coffee Pot" by Ixion
This is a relatively easy installation. Performed a number of years ago, it was discovered in the archives. Once the roof section was...
VR L class by Auscision Models
The model comes DCC ready with a 21 pin decoder interface (MTC). The Auscision speaker enclosure is designed around an ESU 20x40mm...
VR T class by Austrains
Required parts: ESU 58420 LokSound 5 DCC decoder DCCSound Sugarcube speaker for Austrains T class Golden white/warm white LEDs & 470 ohm...
VR B class by Auscision Models
Auscision B class (hardwired) The following model came with a V4 decoder already fitted and hardwired. The customer requested a V5...
NSWGR 48 / SAR 830 class by Trainorama
Room is limited in this Trainorama version of the 48 class, so we have fitted a smaller ESU (58820) LokSound V5 Micro decoder, but also...
VR R class by Eureka Models
Coal burner This particular model came with a pre-installed ESU LokSound V4 decoder. The model was upgraded with the following items: ESU...
VR X class (1st ser.) by Auscision Models
Items used: ESU 58429 LokSound 5 21-MTC decoder with DCCSound 1st series X class sound DCCSound Premium twin driver sugarcube speaker The...
SRANSW XPT by Auscision Models
The first step is to remove the body from the chassis. The skirt of the body is spread ouwards and the body lifts off the chassis. It is...
VR T class (1st ser.) by BRM
1) Remove coupler chain pin from coupler box on both ends of model 2) Remove 4 body mount screws and coupler assemblies from underside 3)...
V/Line N class by Auscision Models
Fitting sound in an Auscision N class can be accomplished in one of two ways, either re-using the 8 pin plug motherboard or hardwiring a...